Nuclear Qualified Control Room Displays

Your preferred source for Bargraph meters, Digital panel meters, transmitters and serial remote displays.  These Digital Panel Meters and Bargraph displays are packaged in industry standard sizes for easy form factor replacement of your obsolete indicators. Select from 1/8 DIN panel meters, standard 6 inch edgewise bargraph displays or ANSI standard 4 1/2 inch switchboard sizes all available as simple display only digital panel meters to more sophisticated automatic color changing bargraph displays.  Their multiple input options of 4-20mA, thermocouple, RTD, DC Volts, DC amps and RMS Volts, RMS amps makes them suitable for just about any application. Combined with our flexible outputs of 4-20mADC, 0-5VDC, 10 Amp relays or logic outputs for a complete control or alarming center. Use the serial communications to compliment your control system and poll each unit as needed for data collection and data logging. Compatible with all ascii communications platforms for PLC's and DCS systems. Contact our sales department for your specific qualification needs to see if we can help solve your obsolescence issue.

  HI-QTBS ANSI size Switchboard Bargraph Meter with 6 digit LED display

HI-QTBS Bargraph Display with its automatic programmable tri-color bargraph replaces GE / Yokogawa "DB-40" style switchboard meters, Dixson's model BTW71 / BW051, Weschler BG series and other similar instruments. The bargraph display can be configured to change colors at your predetermined points or can be configured as a single color graph.  The scale plate marking is 0-100% standard with special scale plates available to fit your particular requirements.  The 101 segment Bargraph display provides 1% resolution while the 6 digit numeric display provides 0.001% resolution.  The numeric display is also programmable to show from 1 to 6 digits so if your operators are trained to use only 4 digits of accuracy you can set this up for them.

Click on picture to view data sheet (requires Adobe Acrobat reader)

HI-Q114      11 inch tall tri color  Bargraph meter with 4 digit LED display

Hi-Q114 edgewise Bargraph Display replaces the obsolete Chessel 700 series of instruments. The HI-Q114 Bargraph meter comes as a single tri-color bargraph with a full 4 digit numeric display. The bargraph resolution is 2% (51 segments) and is fully programmable for color zone range, bar start & full scale value, flashing and more. The addition of the analog outputs and relay outputs allows you to sound alarms, control pumps and retransmit the signal to a PLC or DCS for remote control, data logging or secondary remote indication.  The communications port, along with our software package allows for quick and easy configuration of the unit for your particular needs. The scale plate is 0-100% standard and special scale plates are available as needed.Click on picture to view data sheet  (requires Adobe Acrobat reader)

HI-Q116 tri color  Bargraph Display with 4 digit LED display

HI-Q116 vertical bargraph Meter replaces the obsolete Bailey "RY" series. Comes with a fully programmable tri-color LED bargraph and 4 digit, 0.38" numeric LED display, single or dual channels. The Multi input channel capabilities, front panel replaceable scale plate, full metal enclosure for maximum EMI/RFI protection and 10-32VDC or 90-265VAC power inputs provide total system flexibility. The 51 segment bargraph display gives you a 2% resolution and can be programmed for flashing on alarm limits and color changing. Unit is front panel mounted using the twist-lock fasteners for front panel serviceability and also available as a drop in replacement which will slide into the existing Bailey CAN without the need to change the wiring. Click on picture to view data sheet   (requires Adobe Acrobat reader)

HI-Q117  three channel Bargraph meter with 4 digit LED displays

HI-Q117 vertical bargraph Meter replaces the obsolete Bailey "775" series. Available with a fully programmable tri-color LED bargraph Display and 4 digit, 0.38" numeric display, single, dual or triple channel. Its multi input channel capabilities, front panel replaceable scale plate, full metal enclosure for maximum EMI/RFI protection and 10-32VDC or 90-265VAC power inputs provide you with maximum system flexibility. Add the Relay outputs, analog outputs and RS232c, RS422 or RS485 serial communications for control and alarming. The 51 segment bargraph gives you 2% resolution and can be programmed for flashing on alarm limits and color changing. Unit is panel mounted using the compression fasteners for easy serviceability. Click on picture to view data sheet   (requires Adobe Acrobat reader)

HI-Q118 Bargraph meter with 4 digit LED display replaces Foxboro 257 series

HI-Q118 vertical bargraph Display replaces the obsolete Foxboro "257" series. Comes with a fully programmable tri-color LED bargraph and 4 digit, 0.38" numeric display, single, dual or triple channel. The multi input channel capabilities, front panel replaceable scale plate, full metal enclosure for maximum EMI/RFI protection and 10-32VDC or 90-265VAC power inputs give total system flexibility. Add the Relay outputs, analog outputs and RS232c, RS422 or RS485 serial communications for alarm monitoring and control. The 51 segment bargraph display gives you a 2% resolution and can be programmed for flashing on alarm limits and color changing. Unit is panel mounted using the compression fasteners for easy serviceability. The extended length versions include the rear seismic support hardware as on the original Foxboro models. Click on picture to view data sheet (requires Adobe Acrobat reader)

HI-Q119 Industry Standard tri color  Bargraph meter with 4 digit LED display

HI-Q119 vertical bargraph Display replaces the GE180 series as well as other standard 6" edgewise meters such as the Westinghouse VX251 and VX252, International Instruments 1151 and 1152, Dixson BB101P / BB202P and various Weschler products . Comes with a fully programmable 51 segment tri-color LED bargraph display and 4 digit, 0.38" numeric display. The single and dual channel versions are in the same size enclosure. Its multi input channel capabilities, front panel replaceable scale plate, full metal enclosure for maximum EMI/RFI protection and 10-32VDC or 90-265VAC power inputs give maximum system flexibility. Add the Relay outputs, analog outputs and RS232c, RS422 or RS485 serial communications for remote control, alarming and distribution. The 51 segment bargraph Display can be programmed for flashing on alarm limits and color changing. Unit is front panel mounted using the twist-lock fasteners for front panel serviceability. Click on picture to view data sheet (requires Adobe Acrobat reader)

The HI-Q series of instruments are fully programmable for color zones, color banding, color changing, flashing, resolution and other Desirable features. Its configurable design allows you to stock a single item and various different scale plates. When a unit is removed from service, simply replace it with a stocked item and upload the configuration file.

Key Benefits

 

sales@precisioninstrument.com

 

7212 E. River Canyon Way

Problems? Send mail to Webmaster@PrecisionInstrument.com with questions or comments about this web site.
Copyright © 1998-2011 Precision Instrument Company. All of our products are proudly made in the USA
Last modified: 29 June, 2011
Site Map